INSTALLATION
PROCEDURE
1. INSTALL MULTIPLEX NETWORK DOOR ECU
(a) Engage the 2 guides to install the multiplex network door ECU with the 2 bolts.
Torque:
5.5 N·m {56 kgf·cm, 49 in·lbf}
(b) Connect the 2 connectors.
2. INSTALL BACK DOOR TRIM PANEL ASSEMBLY (w/o Rear No. 2 Seat)
Click here
3. INSTALL BACK DOOR TRIM PANEL ASSEMBLY (w/ Rear No. 2 Seat)
Click here
4. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY
Click here
5. INSTALL DOOR PULL HANDLE
Click here
6. INSTALL BACK DOOR TRIM BASE
Click here
7. INSTALL BACK DOOR LOCK COVER (w/o Rear No. 2 Seat)
Click here
8. INSTALL BACK DOOR LOCK COVER (w/ Rear No. 2 Seat)
Click here
9. INSTALL BACK DOOR TRIM COVER LH (w/o Rear No. 2 Seat)
Click here
10. INSTALL BACK DOOR TRIM COVER LH (w/ Rear No. 2 Seat)
Click here
11. INSTALL BACK DOOR TRIM COVER RH
HINT:
Use the same procedure as for the LH side.
12. INSTALL BACK WINDOW UPPER PANEL TRIM (w/o Rear No. 2 Seat)
Click here
13. INSTALL BACK WINDOW UPPER PANEL TRIM (w/ Rear No. 2 Seat)
Click here
14. INITIALIZE POWER BACK DOOR SYSTEM
Click here
15. INSPECT POWER BACK DOOR SYSTEM
Click here
16. INSPECT BACK DOOR CLOSER SYSTEM
Click here
Components
RemovalLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Blind Spot Monitor System: Master Module Horizontal Axis Misalignment (C1AC1)
DESCRIPTION This DTC is stored when the angle of the blind spot monitor sensor LH deviates more than the allowable range from the horizontal axis. HINT:
If a drum tester such as a speedometer tester, brake/speedometer combination tester or chassis dynamometer is used with the blind spot monitor s ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Navigation System: Does not Play even after Bluetooth Audio Mode is Selected
CAUTION / NOTICE / HINT NOTICE: Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Navigation System. Click here HINT: Even if the portable player can play audio content, i ...