INSPECTION
PROCEDURE
1. INSPECT FRONT DOOR OUTSIDE HANDLE ASSEMBLY LH
| (a) Apply 6.0 V (4 dry cell batteries in series) to the front door outside handle assembly LH and check that the light comes on. NOTICE: Do not apply more than 6.0 V. OK:
If the result is not as specified, replace the front door outside handle assembly LH. |
|
2. INSPECT FRONT DOOR OUTSIDE HANDLE ASSEMBLY RH
| (a) Apply 6.0 V (4 dry cell batteries in series) to the front door outside handle assembly RH and check that the light comes on. NOTICE: Do not apply more than 6.0 V. OK:
If the result is not as specified, replace the front door outside handle assembly RH. |
|
Components
AdjustmentLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Automatic Transaxle System: Terminals Of Ecm
TERMINALS OF ECM ECM HINT: The standard voltage and resistance of each ECM terminal is shown in the table below. In the table, first follow the information under "Condition". Look under "Terminal No. (Symbol)" for the terminals to be inspected. The standard voltage or resistance between the termina ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Sfi System: System Voltage Circuit Short to Ground or Open (P056014)
MONITOR DESCRIPTION The battery supplies electricity to the ECM even when the engine switch is off. This power allows the ECM to store data such as DTC history, freeze frame data and fuel trim values. If the battery voltage falls below a minimum level, the memory is cleared and the ECM determines th ...