ON-VEHICLE INSPECTION
PROCEDURE
1. INSPECT HOOD SUB-ASSEMBLY
(a) Check that the clearance measurements of areas a through c are within each standard range.
Standard Clearance | Area | Measurement | Area | Measurement |
|---|---|---|---|
| a | 2.95 to 5.95 mm (0.116 to 0.234 in.) | b | 8.15 mm (0.321 in.) |
| c | 5.25 mm (0.207 in.) | - | - |
Components
DisassemblyLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Rocker Panel Moulding: Installation
INSTALLATION CAUTION / NOTICE / HINT HINT:
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
PROCEDURE 1. INSTALL BODY ROCKER PANEL MOULDING ASSEMBLY (a) Engage the 6 clips as shown in the illustration. Install in this Direction (b) Ins ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Main Body Ecu: Installation
INSTALLATION CAUTION / NOTICE / HINT NOTICE:
Before replacing the main body ECU (multiplex network body ECU), refer to Registration.
Click here
After the main body ECU (multiplex network body ECU) has been replaced, the automatic light control system will not operate until the engine is sta ...