INSTALLATION
PROCEDURE
1. INSTALL DOOR CONTROL SWITCH (INTEGRATION CONTROL AND PANEL ASSEMBLY)
(a) Engage the 4 claws as shown in the illustration to install the door control switch (integration control and panel assembly).
| Install in this Direction |
2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY
Click here
3. CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
Click here
4. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
Click here
5. INSTALL COWL SIDE TRIM BOARD LH
Click here
6. INSTALL FRONT DOOR SCUFF PLATE LH
w/o Rear No. 2 Seat:
Click here
w/ Rear No. 2 Seat:
Click here
7. INSTALL INSTRUMENT PANEL GARNISH LH
Click here
InspectionLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Air Conditioning Amplifier: Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during air conditioning amplifier removal/installation are shown below. Necessary Procedure After Parts Remove ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Rear Axle Carrier (for Awd): Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during rear axle carrier sub-assembly removal/installation are shown below. Necessary Procedures After Parts R ...