PROBLEM SYMPTOMS TABLE
NOTICE:
If the multiplex network door ECU has been removed and installed or replaced, or if any of the connectors have been disconnected, initialize the power back door system.
Click here
HINT:
| Symptom | Suspected Area | Link |
|---|---|---|
| Power back door cannot be operated using any switch | Meter / gauge system | |
| Power back door sensor assembly LH | ||
| Power back door sensor assembly RH | ||
| Wire harness and connector | ||
| Multiplex network door ECU | ||
| Power back door does not operate using the cabin switch | Power back door switch (integration control and panel assembly) | |
| Wire harness and connector | ||
| Multiplex network door ECU | ||
| Main body ECU (multiplex network body ECU) | ||
| Power back door does not operate outside switch | Back door control switch | |
| Wire harness and connector | ||
| Multiplex network door ECU | ||
| Power back door cannot be opened using the back door opener switch assembly (open switch) (back door entry unlock function is normally) | Multiplex network door ECU | |
| Power back door cannot be operated using kick sensor* | Wire harness and connector | |
| Kick door control sensor | ||
| Multiplex network door ECU | ||
| Power back door cannot be operated using kick sensor and back door opener switch* | Smart access system (for Entry Function) | |
| Power back door close and lock function does not operate | Door control switch | |
| Wire harness and connector | ||
| Multiplex network door ECU | ||
| Back door closer does not operate | Back door visual check (foreign objects) | |
| Back door lock assembly | ||
| Wire harness and connector | ||
| Multiplex network door ECU | ||
| The back door closer does not reverse rotation operation properly when the back door opener switch assembly (open switch) is operated (during the back door closer operation). | Smart access system (for Entry Function) | |
| Multiplex network door ECU | | |
| Power back door warning system does not operate | Wireless door lock control system | |
| Wire harness and connector | ||
| Power back door warning buzzer | ||
| Multiplex network door ECU | ||
| Jam protection function activates during power back door operation | Back door visual check (foreign objects) | |
| Power back door unit assembly set LH | ||
| Power back door unit assembly set RH | ||
| Power back door sensor assembly LH | ||
| Power back door sensor assembly RH | ||
| Wire harness and connector | ||
| Multiplex network door ECU |
Initialization
Dtc Check / ClearLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Horn: Relay
On-vehicle InspectionON-VEHICLE INSPECTION PROCEDURE 1. INSPECT HORN RELAY ASSEMBLY (a) Remove the HORN relay. *a Component without harness connected (HORN Relay) (b) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Conne ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Rear Power Seat Control System(for Second Row): Back Door Courtesy Switch Circuit
DESCRIPTION The fold seat control ECU receives switch operation signals, the driving condition signal and back door courtesy light switch assembly signal and operates the rear power seat according to these signals. WIRING DIAGRAM PROCEDURE 1. CHECK BACK DOOR LOCK ASSEMBLY (BACK DOOR COURTESY ...