INSTALLATION
PROCEDURE
1. INSTALL POWER BACK DOOR WARNING BUZZER
(a) Engage the clamp to install the power back door warning buzzer.
(b) Connect the connector.
2. INSTALL BACK DOOR TRIM PANEL ASSEMBLY (w/o Rear No. 2 Seat)
Click here
3. INSTALL BACK DOOR TRIM PANEL ASSEMBLY (w/ Rear No. 2 Seat)
Click here
4. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY
Click here
5. INSTALL DOOR PULL HANDLE
Click here
6. INSTALL BACK DOOR TRIM BASE
Click here
7. INSTALL BACK DOOR LOCK COVER (w/o Rear No. 2 Seat)
Click here
8. INSTALL BACK DOOR LOCK COVER (w/ Rear No. 2 Seat)
Click here
9. INSTALL BACK DOOR TRIM COVER LH (w/o Rear No. 2 Seat)
Click here
10. INSTALL BACK DOOR TRIM COVER LH (w/ Rear No. 2 Seat)
Click here
11. INSTALL BACK DOOR TRIM COVER RH
HINT:
Use the same procedure as for the LH side.
12. INSTALL BACK WINDOW UPPER PANEL TRIM (w/o Rear No. 2 Seat)
Click here
13. INSTALL BACK WINDOW UPPER PANEL TRIM (w/ Rear No. 2 Seat)
Click here
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Automatic Transaxle Assembly: Installation
INSTALLATION PROCEDURE 1. INSTALL TORQUE CONVERTER ASSEMBLY (a) Turn the front oil pump drive gear so that either key is at the top and place a matchmark on the transaxle housing to indicate the position of the key. *a Matchmark *b Key (b) Place a matchmark on the ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Intelligent Clearance Sonar System: Stop Light Relay Circuit (C1A4B)
DESCRIPTION When a stop light relay circuit malfunction signal sent from the vehicle stability control system is detected by the clearance warning ECU assembly, DTC C1A4B is stored. DTC No. Detection Item DTC Detection Condition Trouble Area C1A4B Stop Light Relay Circuit Stop light ...