CAUTION / NOTICE / HINT
HINT:
Some versions of "Bluetooth" compatible audio players may not function properly, or the functions may be limited using the radio receiver assembly, even if the portable audio player itself can play files.
Click here
PROCEDURE
1. | CHECK THAT PORTABLE PLAYER IS "Bluetooth" AUDIO COMPATIBLE |
(a) Check if the portable player is "Bluetooth" audio compatible.
Result | Proceed to |
---|---|
The portable player is "Bluetooth" audio compatible. | A |
The portable player is not "Bluetooth" audio compatible. | B |
B | ![]() | USE A "Bluetooth" AUDIO COMPATIBLE PORTABLE PLAYER |
|
2. | CHECK CONNECTION PROCEDURE OF CONNECTED DEVICE |
(a) Referring to Owner's Manual, correctly register the portable player.
(b) Check that the portable player has been registered as a connected device.
HINT:
The portable player cannot be registered under any of the following conditions:
OK:
The portable player has been registered as a connected device.
OK | ![]() | END |
|
3. | CHECK USING ANOTHER "Bluetooth" AUDIO COMPATIBLE VEHICLE OF SAME MODEL |
(a) Check if the portable player can be registered normally to another "Bluetooth" audio compatible vehicle of the same model.
OK:
The portable player can be registered.
NG | ![]() | MALFUNCTION IN PORTABLE PLAYER |
|
4. | REMOVE ADDITIONAL DEVICES WHICH USE RADIO WAVES |
(a) Remove additional devices which use radio waves.
(b) Place the portable player close to the radio receiver assembly.
(c) Check that the portable player can be registered as a connected device.
OK:
The portable player can be registered.
OK | ![]() | END |
NG | ![]() | PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE |
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Front Bumper: Components
COMPONENTS ILLUSTRATION *A for TMMC Made - - *1 COOL AIR INTAKE DUCT SEAL *2 FRONT BUMPER ASSEMBLY *3 FRONT FENDER MOULDING SUB-ASSEMBLY LH *4 FRONT FENDER MOULDING SUB-ASSEMBLY RH ILLUSTRATION *A w/o Fog Light *B w/ Fog Light *C w/ Panoramic View Mon ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Rear Light Assembly: Installation
INSTALLATION CAUTION / NOTICE / HINT HINT:
Use the same procedure for the RH side and LH side.
The following procedure is for the LH side.
PROCEDURE 1. INSTALL REAR LIGHT ASSEMBLY (for Bulb Type Turn Signal Light) (a) Engage the pin to temporarily install the rear light assembly as shown in ...