DATA LIST / ACTIVE TEST
PERFORM ACTIVE TEST
HINT:
Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Main Body / Active Test.
(e) Perform the Active Test according to the display on the Techstream.
Body Electrical > Main Body > Active Test| Tester Display | Measurement Item | Control Range | Diagnostic Note |
|---|---|---|---|
| Vehicle Horn | Vehicle horn | ON/OFF | - |
Problem Symptoms Table
RelayLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Automatic Transaxle System: Initialization
INITIALIZATION RESET TRANSAXLE COMPENSATION CODE NOTICE:
If the following parts have been replaced, initialize the ECM and perform Reset Memory and Perform Road Test to Allow ECM to Learn.
ECM
Transmission valve body assembly
Shift solenoid valve SL3
Shift solenoid valve SL4
Shift sole ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Sliding Roof / Convertible: Sliding Roof Switch Assembly
ComponentsCOMPONENTS ILLUSTRATION *1 MAP LIGHT ASSEMBLY - - InspectionINSPECTION PROCEDURE 1. INSPECT SLIDING ROOF SWITCH (MAP LIGHT ASSEMBLY) (a) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Condition Specified C ...