Replacement
REPLACEMENT
CAUTION / NOTICE / HINT
HINT:
PROCEDURE
1. REMOVE NO. 3 BACK DOOR SERVICE HOLE COVER
(a) Disengage the 5 guides to remove the No. 3 back door service hole cover. |
|
2. REMOVE BACK-UP LIGHT BULB
(a) Turn the back-up light socket and wire with the back-up light bulb as shown in the illustration to disconnect them as a unit.
![]() | Remove in this Direction |
(b) Remove the back-up light bulb from the back-up light socket and wire.
3. INSTALL BACK-UP LIGHT BULB
(a) Install the back-up light bulb to the back-up light socket and wire.
(b) Turn the back-up light socket and wire with the back-up light bulb as shown in the illustration to connect them as a unit.
![]() | Install in this Direction |
4. INSTALL NO. 3 BACK DOOR SERVICE HOLE COVER
(a) Engage the 5 guides to install the No. 3 back door service hole cover. |
|
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Rear No. 2 Seat Assembly: Inspection
INSPECTION PROCEDURE 1. INSPECT NO. 2 SEAT CUSHION FRAME SUB-ASSEMBLY RH *a Component without harness connected (No. 2 Seat Cushion Frame Sub-assembly RH) (a) Apply battery voltage to the lifter motor connector, and check that the No.2 seat cushion frame sub-assembly RH operates smoothly as ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Vehicle Stability Control System: Zero Point Calibration of Yaw Rate Sensor Undone (X204C)
DESCRIPTION Code Tester Display Measurement Item Trouble Area X204C Zero Point Calibration of Yaw Rate Sensor Undone History of incomplete yaw rate sensor zero point calibration
Sensor installation
Yaw rate and acceleration sensor (airbag sensor assembly)*1
Yaw rate sensor ...