INSPECTION
PROCEDURE
1. INSPECT FOG LIGHT ASSEMBLY LH
| (a) Apply battery voltage to the fog light assembly LH and check that the light comes on. OK:
If the result is not as specified, replace the fog light assembly LH. |
|
2. INSPECT FOG LIGHT ASSEMBLY RH
| (a) Apply battery voltage to the fog light assembly RH and check that the light comes on. OK:
If the result is not as specified, replace the fog light assembly RH. |
|
Removal
AdjustmentLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Front Seat Cushion Heater: Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during front seat cushion heater removal/installation are shown below. Necessary Procedures After Parts Removed ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Seat Heater System: Dtc Check / Clear
DTC CHECK / CLEAR CHECK DTC (a) Connect the Techstream to the DLC3. (b) Turn the engine switch on (IG). (c) Turn the Techstream on. (d) Enter the following menus: Body Electrical / Air Conditioner / Trouble Codes. Body Electrical > Air Conditioner > Trouble Codes (e) Check for DTCs. CLEAR DTC ...