INSPECTION
PROCEDURE
1. INSPECT REAR LIGHT ASSEMBLY LH
| (a) Apply battery voltage to the rear light assembly LH and check that the lights come on. OK:
If the result is not as specified, replace the rear light assembly LH. |
|
2. INSPECT REAR LIGHT ASSEMBLY RH
| (a) Apply battery voltage to the rear light assembly RH and check that the lights come on. OK:
If the result is not as specified, replace the rear light assembly RH. |
|
Disassembly
ReassemblyLexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Power Steering System: Drive Mode Select Switch Circuit
DESCRIPTION The electronic throttle and the EPS character change by the operation of the drive mode select switch (combination switch assembly). WIRING DIAGRAM PROCEDURE 1. CHECK THE PROBLEM SYMPTOMS (a) Check each symptom by checking the suspected areas in the table below. Result Pro ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Steering Pad Switch: Installation
INSTALLATION PROCEDURE 1. INSTALL STEERING PAD SWITCH ASSEMBLY (a) Engage the 2 claws and 2 pins to install the steering pad switch assembly. (b) Install the 2 screws. Torque: 2.4 N·m {24 kgf·cm, 21 in·lbf} (c) Connect the steering pad switch connector to the spiral cable with sensor sub-assembl ...