OPERATION CHECK
OPERATION CHECK
(a) Turn the engine switch off.
(b) Connect the trailer connector to the towing socket connector.
(c) Check that the stop lights on the vehicle and trailer come on when the brake pedal is depressed.
(d) Check that the taillights on the vehicle and trailer come on when the taillights are turned on.
(e) Check that the hazard warning lights on the vehicle and trailer come on when the hazard warning switch is turned on.
(f) Turn the engine switch on (IG).
(g) Check that the turn indicator lights on the vehicle and trailer come on when the turn indicator lights are turned on.
HINT:
When the Automatic Current Cut function activates, reset the towing converter system by operating the turn signal switches and brake pedal, and turning hazard warning switch and light control switch off then on.
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Blind Spot Monitor Sensor: Installation
INSTALLATION CAUTION / NOTICE / HINT NOTICE:
Avoid any impact to the blind spot monitor sensor.
Do not drop the blind spot monitor sensor. If it is dropped, replace it with a new one.
HINT:
The blind spot monitor beam axis inspection is performed to confirm whether the sensor is transmitt ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Camshaft Oil Control Valve (for Bank 1): On-vehicle Inspection
ON-VEHICLE INSPECTION PROCEDURE 1. REMOVE CAMSHAFT TIMING OIL CONTROL SOLENOID ASSEMBLY Click here 2. INSPECT CAMSHAFT TIMING GEAR BOLT (a) for intake side: (1) Check the stroke of the plunger in the center of the camshaft timing gear bolt. Standard Stroke: 4.5 mm (0.177 in.) or more HINT: W ...