INSTALLATION
PROCEDURE
1. INSTALL WASHER MOTOR AND PUMP ASSEMBLY
(a) Install the washer motor and pump assembly as shown in the illustration.
| Install in this Direction |
(b) Connect the connector.
(c) Connect the washer hose.
2. ADD WASHER FLUID
(a) Connect the rear washer hose.
(b) Add washer fluid to the washer jar.
3. INSTALL FRONT FENDER SPLASH SHIELD SUB-ASSEMBLY RH
(a) for TMK Made:
(1) Install the front fender splash shield sub-assembly RH with the 7 clips and 6 screws.
(b) for TMMC Made:
(1) Install the front fender splash shield sub-assembly RH with the 8 clips and 6 screws.
4. INSTALL FRONT WHEEL OPENING EXTENSION PAD RH
(a) Install the front wheel opening extension pad RH with the 2 screws.
5. INSTALL FRONT FENDER MOULDING SUB-ASSEMBLY RH
HINT:
Use the same procedure as for the LH side.
Click here
6. INSTALL FRONT WHEEL RH
Click here
RemovalLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Automatic Transaxle System: Precaution
PRECAUTION PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE BATTERY TERMINAL NOTICE: When disconnecting the cable from the negative (-) battery terminal, initialize the following system(s) after the cable is reconnected: System See Procedure Lane Control System Pre-collision System ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Hood Lock Control Cable Assembly: Removal
REMOVAL PROCEDURE 1. REMOVE FRONT WIPER MOTOR AND LINK ASSEMBLY Click here 2. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY Click here 3. REMOVE HOOD LOCK CONTROL CABLE COVER (a) Remove the screw. (b) Disengage the clamp and remove the hood lock control cable cover. 4. REMOVE HOOD LO ...