ADJUSTMENT
PROCEDURE
1. REMOVE WASHER NOZZLE SUB-ASSEMBLY
Click here
2. ADJUST WASHER NOZZLE SUB-ASSEMBLY
(a) Select a washer nozzle sub-assembly so that the position that the washer fluid hits the windshield will be within the standard area. Replace the washer nozzle sub-assembly with the selected one.
| *a | Washer Fluid Spray Angle | *b | Part Number |
3. INSTALL WASHER NOZZLE SUB-ASSEMBLY
Click here
On-vehicle Inspection
RemovalLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Power Back Door System (w/ Outside Door Control Switch): PBD Touch Sensor LH Circuit (B222A)
DESCRIPTION This DTC is stored when the multiplex network door ECU detects a malfunction in the power back door sensor assembly LH touch sensor. DTC No. Detection Item DTC Detection Condition Trouble Area B222A PBD Touch Sensor LH Circuit Multiplex network door ECU detects power bac ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Wiper And Washer System: Headlight Cleaner Motor and Relay Circuit
DESCRIPTION The headlight cleaner motor and pump assembly is controlled by the headlight ECU sub-assembly RH. When the headlight ECU sub-assembly RH receives the washer switch operation signal 5 times with the low beam headlights on, it operates the H-LP CLN relay once. WIRING DIAGRAM CAUTION / NOT ...