REMOVAL
CAUTION / NOTICE / HINT
HINT:
PROCEDURE
1. REMOVE WASHER NOZZLE SUB-ASSEMBLY
(a) Using a screwdriver, disengage the 2 claws as indicated by the arrows, in the order shown in the illustration to separate the washer nozzle sub-assembly.
| *a | Protective Tape |
| Remove in this Direction (1) |
| Remove in this Direction (2) |
NOTICE:
Be careful not to damage the windshield glass.
HINT:
Tape the screwdriver tip before use.
| (b) Disconnect the washer hose to remove the washer nozzle sub-assembly. NOTICE: Washer nozzle sub-assemblies cannot be reused. |
|
Adjustment
InstallationLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Lighting (int): Room Light
ComponentsCOMPONENTS ILLUSTRATION *1 SPOT LIGHT ASSEMBLY - - InspectionINSPECTION PROCEDURE 1. INSPECT SPOT LIGHT ASSEMBLY (a) Inspect the rear dome light. (1) Apply battery voltage to the connector and check that the rear map light comes on. OK: Measurement Condition Condition ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Clearance Warning Buzzer (for Rear Side With Rear No. 2 Seat): Installation
INSTALLATION PROCEDURE 1. INSTALL NO. 2 CLEARANCE WARNING BUZZER (a) Connect the connector. (b) Engage the clamp to install the No. 2 clearance warning buzzer. 2. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH Click here 3. INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY Click here 4. INSTALL ROPE HO ...