INSTALLATION
CAUTION / NOTICE / HINT
HINT:
PROCEDURE
1. INSTALL WASHER NOZZLE SUB-ASSEMBLY
(a) Connect a new washer nozzle sub-assembly to the washer hose.
(b) Engage the 2 claws as indicated by the arrows, in the order shown in the illustration to install the washer nozzle sub-assembly.
| Install in this Direction (1) |
| Install in this Direction (2) |
2. INSPECT WASHER NOZZLE SUB-ASSEMBLY
Click here
3. ADJUST WASHER NOZZLE SUB-ASSEMBLY
Click here
RemovalLexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Vehicle Stability Control System: Yaw Rate Sensor Signal Bias Level Out of Range / Zero Adjustment Failure (C006328,C006396)
DESCRIPTION for Optitron Meter Type:
These DTCs are stored when the skid control ECU (brake actuator assembly) receives an internal malfunction signal from the yaw rate and acceleration sensor (airbag sensor assembly).
for TFT Meter Type:
These DTCs are stored when the skid control ECU (bra ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Rear Bumper (w/ Rear No. 2 Seat): Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during rear bumper assembly removal/installation are shown below. Necessary Procedures After Parts Removed/Ins ...