Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual: On-vehicle Inspection

ON-VEHICLE INSPECTION

PROCEDURE

1. INSPECT COOLER CONDENSER ASSEMBLY

(a) If the cooler condenser assembly fins are dirty, clean them with water and dry them with compressed air.

NOTICE:

Do not damage the cooler condenser assembly fins.

(b) If any cooler condenser assembly fins are bent, straighten them using a screwdriver or pliers.

2. INSPECT FOR REFRIGERANT LEAK

(a) Using a halogen leak detector, check the pipe joints for refrigerant leaks.

(b) If a refrigerant leak is detected in a joint, check the torque of the bolt of the joint.

    Components
    COMPONENTS ILLUSTRATION *1 HOOD LOCK ASSEMBLY *2 HOOD LOCK CONTROL CABLE COVER *3 HOOD LOCK RELEASE LEVER PROTECTOR *4 INLET AIR CLEANER ASSEMBLY *5 UPPER RADIATOR SUPPORT SU ...

    Removal
    REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during con ...

    Other materials:

    Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Rear Axle Hub: Installation
    INSTALLATION CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH side and LH side. The following procedure is for the LH side. PROCEDURE 1. INSTALL REAR AXLE HUB AND BEARING ASSEMBLY (for 2WD) (a) Install the rear axle hub and bearing assembly and rear disc brake dust cover sub-a ...

    Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Vacuum Pump: Removal
    REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during vacuum pump assembly removal/installation are shown below. Necessary Procedure After Parts Removed/Install ...

    Lexus RX (RX 350L, RX450h) 2016-{YEAR} Owners Manual

    Lexus RX (RX 350L, RX450h) 2016-{YEAR} Repair Manual

    © 2025 Copyright www.lexusrx.net
    0.0159