REASSEMBLY
PROCEDURE
1. INSTALL COOLER DRYER
| (a) Using pliers, install a new cooler dryer to the modulator. |
|
| (b) Sufficiently apply compressor oil to 3 O-rings and the fitting surfaces of a new cap. Compressor Oil: ND-OIL 12 or equivalent NOTICE: Keep the O-rings and O-ring fitting surfaces free from dirt or foreign matter. |
|
| (c) Using a 14 mm straight hexagon socket wrench, install the cap to the modulator. Torque: 4.0 N·m {41 kgf·cm, 35 in·lbf} |
|
InstallationLexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Sfi System: Crankshaft Position Sensor "A" Circuit Short to Ground (P033511,P033515,P03351F,P03352A,P033531)
DESCRIPTION The crankshaft position sensor system consists of a crankshaft position sensor plate and Magneto Resistance Element (MRE) type sensor. The crankshaft position sensor plate has 34 teeth at 10° intervals (2 teeth are missing for detecting top dead center), and is installed on the cranksha ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Electrical Key Oscillator(for Luggage Compartment): Installation
INSTALLATION PROCEDURE 1. INSTALL NO. 3 INDOOR ELECTRICAL KEY ANTENNA ASSEMBLY (a) Engage the clamp to install the No. 3 indoor electrical key antenna assembly as shown in the illustration. Install in this Direction NOTICE: Be careful when installing the No. 3 indoor electrical key antenna ...