INSTALLATION
PROCEDURE
1. INSTALL NO. 1 COOLER THERMISTOR
| (a) Install the No. 1 cooler thermistor as shown in the illustration. Installation Position:
NOTICE:
|
|
2. INSTALL NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY
Click here
3. INSTALL COOLER EXPANSION VALVE
Click here
4. INSTALL COOLING UNIT PARTS
Click here
5. INSTALL HEATER RADIATOR UNIT SUB-ASSEMBLY
Click here
6. INSTALL HEATER GROMMET
Click here
7. INSTALL NO. 1 AIR CONDITIONING RADIATOR DAMPER SERVO SUB-ASSEMBLY
Click here
8. INSTALL AIR CONDITIONING HARNESS ASSEMBLY
Click here
9. INSTALL BLOWER ASSEMBLY
Click here
RemovalLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Roof Rack(w/o Rear No. 2 Seat): Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during roof rack removal/installation are shown below. Necessary Procedures After Parts Removed/Installed/Repla ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Vehicle Stability Control System: Brake Warning Light does not Come ON
DESCRIPTION The skid control ECU (brake actuator assembly) controls the brake warning light in the combination meter assembly via CAN communication. CAUTION / NOTICE / HINT NOTICE: After replacing the skid control ECU (brake actuator assembly), perform "Calibration". Click here PROCEDURE 1. ...