INSTALLATION
PROCEDURE
1. INSTALL NO. 2 AIR CONDITIONING HARNESS ASSEMBLY
(a) Engage the 2 claws to install the No. 2 air conditioning harness assembly.
(b) Install the rear cooling unit cover LH to the rear cooling unit cover RH with the 12 screws.
(c) Engage each clamp.
2. INSTALL HEATER RADIATOR UNIT SUB-ASSEMBLY
Click here
3. INSTALL COOLER UNIT CLAMP
Click here
4. INSTALL NO. 3 COOLING UNIT BRACKET
Click here
5. INSTALL NO. 2 COOLING UNIT BRACKET
Click here
6. INSTALL NO. 1 COOLING UNIT BRACKET
Click here
7. INSTALL REAR NO. 1 COOLING UNIT DAMPER SERVO SUB-ASSEMBLY
Click here
8. INSTALL REAR NO. 2 COOLING UNIT DAMPER SERVO SUB-ASSEMBLY
Click here
9. INSTALL REAR COOLING UNIT ASSEMBLY
Click here
InspectionLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Throttle Body: On-vehicle Inspection
ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT THROTTLE BODY WITH MOTOR ASSEMBLY (a) Before cleaning, or after cleaning the throttle body with motor assembly and installing it to the vehicle, turn the engine switch on (IG) without operating the accelerator pedal sensor assembly. NOTICE: If the accelerat ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Vacuum Warning Switch: Components
COMPONENTS ILLUSTRATION *1 OUTER COWL TOP PANEL SUB-ASSEMBLY - - N*m (kgf*cm, ft.*lbf): Specified torque - - ILLUSTRATION *A for TMC Made - - *1 CHECK VALVE GROMMET *2 VACUUM WARNING SWITCH ASSEMBLY ● Non-reusable part - - ILLUSTRATION * ...