INSTALLATION
PROCEDURE
1. INSTALL NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY LH (for Driver Side)
(a) Engage the 2 claws to install the No. 1 interior illumination light assembly LH.
2. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for Driver Side)
Click here
3. INSTALL COWL SIDE TRIM BOARD LH (for Driver Side)
Click here
4. INSTALL FRONT DOOR SCUFF PLATE LH (for Driver Side)
Click here
5. INSTALL NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY RH (for Front Passenger Side)
(a) Engage the 2 claws to install the No. 1 interior illumination light assembly RH.
6. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for Front Passenger Side)
Click here
7. INSTALL COWL SIDE TRIM BOARD RH (for Front Passenger Side)
HINT:
Use the same procedure as for the LH side.
Click here
8. INSTALL FRONT DOOR SCUFF PLATE RH (for Front Passenger Side)
HINT:
Use the same procedure as for the LH side.
Click here
Inspection
Front Door Courtesy SwitchLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Front Radar Sensor System: Software Incompatibility with Cruise Control Module Invalid/Incompatible Software Component (U030557)
DESCRIPTION The millimeter wave radar sensor assembly receives vehicle information from the forward recognition camera via CAN communication. If the vehicle information stored in the forward recognition camera differs from that stored in the millimeter wave radar sensor assembly, the millimeter wave ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Sfi System: Knock Sensor 1 Bank 1 or Single Sensor Circuit Short to Battery or Open (P032515,P033015)
DESCRIPTION Refer to DTC P032511. Click here DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory Note P032515 Knock Sensor 1 Bank 1 or Single Sensor Circuit Short to Battery or Open The knock control sensor (bank 1) output voltage is higher than 4.5 V for ...