INSTALLATION
PROCEDURE
1. INSTALL NO. 2 USB CHARGER SOCKET
(a) Engage the 4 claws to install the No. 2 USB charger socket as shown in the illustration.
| Install in this Direction |
2. INSTALL POWER OUTLET SOCKET LENS
(a) Engage the 2 claws to install the power outlet socket lens as shown in the illustration.
| Install in this Direction |
3. INSTALL NO. 1 POWER OUTLET SOCKET ASSEMBLY
(a) Engage the claw to install the No. 1 power outlet socket assembly as shown in the illustration.
| Install in this Direction |
4. INSTALL CIGAR LIGHTER HOLE COVER
(a) Install the cigar lighter hole cover.
5. INSTALL CONSOLE BOX ASSEMBLY
Click here
6. INSTALL RADIO RECEIVER ASSEMBLY WITH REGISTER
Click here
Components
RemovalLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Rear Drive Shaft Assembly: Reassembly
REASSEMBLY PROCEDURE 1. INSTALL REAR DRIVE SHAFT DUST COVER (a) Using SST, a steel plate and a press, install a new rear drive shaft dust cover. SST: 09527-21011 NOTICE:
The rear drive shaft dust cover should be completely installed.
Be careful not to damage the rear drive shaft dust cover ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Sfi System: Dtc Check / Clear
DTC CHECK / CLEAR NOTICE: When the diagnosis system is changed from normal mode to check mode or vice versa, all DTCs and freeze frame data recorded in normal mode are cleared. Before changing modes, always check and make a note of DTCs and freeze frame data. HINT:
DTCs which are stored in the EC ...