INSPECTION
PROCEDURE
1. INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY (for LH Side)
(a) Measure the resistance according to the value(s) in the table below. Standard Resistance:
If the result is not as specified, replace the front seat cushion heater assembly (for LH side). |
|
2. INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY (for RH Side)
(a) Measure the resistance according to the value(s) in the table below. Standard Resistance:
If the result is not as specified, replace the front seat cushion heater assembly (for RH side). |
|
3. INSPECT FRONT SEAT CUSHION HEATER (FRONT SEAT CUSHION PAD WITH COVER LH)
(a) Measure the resistance according to the value(s) in the table below. Standard Resistance:
If the result is not as specified, replace the front seat cushion heater (front seat cushion pad with cover LH). |
|
4. INSPECT FRONT SEAT CUSHION HEATER (FRONT SEAT CUSHION PAD WITH COVER RH)
(a) Measure the resistance according to the value(s) in the table below. Standard Resistance:
If the result is not as specified, replace the front seat cushion heater (front seat cushion pad with cover RH). |
|
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Shift Lever: Installation
INSTALLATION PROCEDURE 1. INSTALL TRANSMISSION FLOOR SHIFT ASSEMBLY NOTICE: Check that the park/neutral position switch assembly and the shift lever are in neutral. (a) Temporarily install the transmission floor shift assembly to the vehicle body with the 4 bolts. (b) Tighten the 4 bo ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Generator (for 150 A Type): Components
COMPONENTS ILLUSTRATION *A Type A *B Type B *1 GENERATOR ASSEMBLY *2 WIRE HARNESS CLAMP BRACKET *3 TERMINAL CAP *4 GENERATOR ASSEMBLY BRACKET N*m (kgf*cm, ft.*lbf): Specified torque - - ILLUSTRATION *1 GENERATOR DRIVE END FRAME BEARING *2 GENERAT ...