COMPONENTS
ILLUSTRATION
| *A | for Front Side | - | - |
| *1 | FOLD SEAT SWITCH ASSEMBLY | *2 | FRONT DECK SIDE TRIM COVER RH |
| *3 | REAR DOOR INSIDE SCUFF PLATE RH | *4 | REAR DOOR SCUFF PLATE RH |
| *5 | REAR SEAT OUTER TRACK BRACKET COVER RH | *6 | REAR SEAT SIDE GARNISH RH |
ILLUSTRATION
| *A | for Rear Side | - | - |
| *1 | DECK BOARD ASSEMBLY | *2 | NO. 1 DECK BOARD |
| *3 | REAR NO. 4 FLOOR BOARD | *4 | TONNEAU COVER ASSEMBLY |
ILLUSTRATION
| *A | for Rear Side | *B | w/o Woofer |
| *C | w/ Woofer | - | - |
| *1 | DECK SIDE TRIM BOX LH | *2 | FRONT DECK FLOOR BOX |
| *3 | REAR DECK FLOOR BOX | *4 | REAR FLOOR FINISH PLATE |
| *5 | REAR NO. 2 SEAT ASSEMBLY | - | - |
ILLUSTRATION
| *A | for Rear Side | - | - |
| *1 | COOLER (NO. 2 ROOM TEMP. SENSOR) THERMISTOR | *2 | DECK TRIM SIDE PANEL ASSEMBLY LH |
| *3 | FRONT DECK SIDE TRIM COVER LH | *4 | NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY |
| *5 | NO. 1 LUGGAGE COMPARTMENT TRIM HOOK | *6 | NO. 2 AIR CONDITIONING CONTROL ASSEMBLY |
| *7 | REAR DOOR INSIDE SCUFF PLATE LH | *8 | REAR DOOR SCUFF PLATE LH |
| *9 | REAR SEAT OUTER TRACK BRACKET COVER LH | *10 | REAR SEAT SIDE GARNISH LH |
| *11 | ROPE HOOK ASSEMBLY | - | - |
ILLUSTRATION
| *A | for Rear Side | - | - |
| *1 | NO. 1 FOLD SEAT SWITCH ASSEMBLY | - | - |
RemovalLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Power Back Door System (w/ Outside Door Control Switch): Power Back Door does not Operate Using Outside Switch
DESCRIPTION The multiplex network door ECU detects the status of the power back door control switch. If the power back door does not operate when the power back door control switch is operated, there may be a malfunction in the power back door control switch circuit. WIRING DIAGRAM CAUTION / NOTICE ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Steering Gear: Inspection
INSPECTION PROCEDURE 1. INSPECT TIE ROD ASSEMBLY LH (a) Secure the tie rod assembly LH in a vise between aluminum plates. NOTICE: Do not overtighten the vise. (b) Install the nut to the stud bolt. (c) Flip the ball joint back and forth 5 times. (d) Using a torque wrench and the nut, t ...