SYSTEM DESCRIPTION
REAR POWER SEAT CONTROL SYSTEM DESCRIPTION
FUNCTION OF MAIN COMPONENTS
| Component | Function |
|---|---|
| Rear Seatback Frame Sub-assembly (Reclining Motor, Fold Motor) | Uses power supplied from the fold seat control ECU to operate the reclining motor and fold motor to recline, fold and return the rear seatback. Uses a Hall IC built into the fold motor to detect the position of the rear seatback. |
| Rear Power Seat Switch |
|
| Fold Seat Switch assembly | Outputs rear seat fold and return operation signals to the fold seat control ECU to perform a fold or return operation of the rear power seat. |
| Fold Seat Control ECU | Receives signals from each seat switch and operates the reclining motor and fold motor to recline and fold and return the rear power seat. Sounds a buzzer if conditions for the requested operation are not met or a jam is detected. |
Precaution
InitializationLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Headlight Assembly: Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during headlight assembly removal/installation are shown below. Necessary Procedure After Parts Removed/Install ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Audio And Visual System (for 12.3 Inch Display): Switch Operation of Remote Touch not Accepted
CAUTION / NOTICE / HINT NOTICE: Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Audio and Visual System. Click here PROCEDURE 1. START DIAGNOSTIC MODE (a) Enter ...