INSTALLATION
CAUTION / NOTICE / HINT
CAUTION:
Wear protective gloves. Sharp areas on the seat frame may injure your hands.
HINT:
PROCEDURE
1. INSTALL SEAT HEATER ASSEMBLY
(a) Install the seat heater assembly to the separate type rear seatback cover with 10 new tag pins.
2. INSTALL SEPARATE TYPE REAR SEATBACK COVER
Click here
3. INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD
Click here
4. INSTALL RECLINING REMOTE CONTROL LEVER SUB-ASSEMBLY LH
Click here
5. INSTALL REAR SEAT UPPER RECLINING COVER LH
Click here
6. INSTALL REAR SEAT ARMREST ASSEMBLY LH
Click here
7. INSTALL NO. 1 SEAT ARMREST CAP
Click here
8. INSTALL REAR SEATBACK BOARD CARPET ASSEMBLY LH
Click here
9. INSTALL REAR SEATBACK COVER LH
Click here
10. INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER WITH PAD
Click here
11. INSTALL REAR SEAT INNER RECLINING COVER LH
Click here
12. INSTALL CUP HOLDER ASSEMBLY
Click here
13. INSTALL REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY LH
Click here
14. INSTALL NO. 1 RECLINING ADJUSTER RELEASE HANDLE LH
Click here
15. INSTALL REAR SEAT COVER CAP LH
Click here
16. INSTALL REAR NO. 1 SEAT ASSEMBLY LH
Click here
Removal
RelayLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Oil Pump: Inspection
INSPECTION PROCEDURE 1. INSPECT OIL PUMP RELIEF VALVE (a) Coat the oil pump relief valve with engine oil and check that it falls smoothly into the valve hole by its own weight. HINT: If the oil pump relief valve does not fall smoothly, replace the timing chain cover assembly. 2. INSPE ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Fuel Lid Opener Unit: Installation
INSTALLATION PROCEDURE 1. INSTALL FUEL FILLER OPENING LID SUB-ASSEMBLY (a) Temporarily install the fuel tank filler pipe shield with the drain hole and cutout facing downward as shown in the illustration. *a Rib *b Drain Hole *c Cutout (b) Install the fuel inle ...