INSTALLATION
PROCEDURE
1. INSTALL REFRESHING SEAT SWITCH
| (a) Engage the 4 claws to install the refreshing seat switch to the console panel sub-assembly. |
|
2. INSTALL CONSOLE PANEL SUB-ASSEMBLY
Click here
3. INSTALL INSTRUMENT CLUSTER FINISH PANEL ORNAMENT
Click here
4. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
Click here
5. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL
Click here
6. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL
Click here
7. INSTALL REAR CONSOLE UPPER PANEL
Click here
InspectionLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Intelligent Clearance Sonar System: Data List / Active Test
DATA LIST / ACTIVE TEST DATA LIST NOTICE: In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not. HINT: Using the Techstream to read the Data List allows the values or states of ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Road Sign Assist System: Precaution
PRECAUTION PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE BATTERY TERMINAL NOTICE: When disconnecting the cable from the negative (-) battery terminal, initialize the following systems after the cable is reconnected. System Name See Procedure Lane Control System Pre-collision Sys ...