INSPECTION
PROCEDURE
1. INSPECT REAR NO. 3 SPEAKER ASSEMBLY
(a) With the speaker installed, check that there is no looseness or other abnormalities.
(b) Check that there is no foreign matter in the speaker, no tears on the speaker cone or other abnormalities.
| (c) Measure the resistance of the speaker. Standard Resistance: for 12 Speakers
If the result is not as specified, replace the speaker. |
|
Removal
InstallationLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Valve Body Assembly: Reassembly
REASSEMBLY PROCEDURE 1. INSTALL SHIFT SOLENOID VALVE SLT (a) Coat the shift solenoid valve SLT with ATF and install it to the transmission valve body assembly. (b) Install the straight pin. 2. INSTALL SHIFT SOLENOID VALVE SL5 (a) Coat the shift solenoid valve SL5 with ATF and insta ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Yaw Rate And Acceleration Sensor: Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during yaw rate sensor assembly removal/installation are shown below. Necessary Procedure After Parts Removed/Ins ...