Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual: Inspection

INSPECTION

PROCEDURE

1. INSPECT REAR SEAT CENTER BELT ASSEMBLY INNER

(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

1 - 2

Rear No. 1 center seat belt unfastened

Below 1 Ω

Rear No. 1 center seat belt fastened

10 kΩ or higher

If the result is not as specified, replace the rear center seat inner belt assembly.

*a

Component without harness connected

(Rear Center Seat Inner Belt Assembly)

    Components
    COMPONENTS ILLUSTRATION *1 CENTER SEAT HINGE COVER LH *2 NO. 1 RECLINING ADJUSTER RELEASE HANDLE RH *3 REAR CENTER SEAT INNER BELT ASSEMBLY *4 REAR SEAT COVER CAP RH *5 REAR ...

    Installation
    INSTALLATION PROCEDURE 1. INSTALL REAR CENTER SEAT INNER BELT ASSEMBLY (a) Install the rear center seat inner belt assembly with the bolt. Torque: 42 N·m {428 kgf·cm, 31 ft·lbf} NOTICE: Do not all ...

    Other materials:

    Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Front Evaporator Temperature Sensor: Installation
    INSTALLATION PROCEDURE 1. INSTALL NO. 1 COOLER THERMISTOR (a) Install the No. 1 cooler thermistor as shown in the illustration. Installation Position: Part Length A 61.1 mm (2.41 in.) B 50.0 mm (1.97 in.) NOTICE: Be sure to insert the No. 1 cooler thermistor only once be ...

    Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Fog Light Assembly: Removal
    REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during fog light assembly removal/installation are shown below. Necessary Procedure After Parts Removed/Install ...

    Lexus RX (RX 350L, RX450h) 2016-{YEAR} Owners Manual

    Lexus RX (RX 350L, RX450h) 2016-{YEAR} Repair Manual

    © 2026 Copyright www.lexusrx.net
    0.0109