INSTALLATION
PROCEDURE
1. INSTALL REAR CENTER SEAT INNER BELT ASSEMBLY
(a) Install the rear center seat inner belt assembly with the bolt.
Torque:
42 N·m {428 kgf·cm, 31 ft·lbf}
NOTICE:
Do not allow the anchor part of the rear center seat inner belt assembly to overlap the protruding parts of the rear seatback frame sub-assembly.
| Protruding Part |
(b) Engage the guide.
(c) Connect the connector.
2. INSTALL CENTER SEAT HINGE COVER LH
Click here
3. INSTALL SEPARATE TYPE REAR SEAT CUSHION COVER WITH PAD
Click here
4. INSTALL REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY RH
Click here
5. INSTALL NO. 1 RECLINING ADJUSTER RELEASE HANDLE RH
Click here
6. INSTALL REAR SEAT COVER CAP RH
Click here
7. INSTALL REAR NO. 1 SEAT ASSEMBLY RH
Click here
Inspection
RemovalLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Power Back Door System (w/ Outside Door Control Switch): Back Door Closer Switch Malfunction (B2251)
DESCRIPTION The multiplex network door ECU receives signals from the latch switch, position switch, pawl switch and back door courtesy switch, which are built into the back door lock assembly. Based on these signals, the latch position of the back door lock assembly is determined. DTC No. Detec ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Engine: On-vehicle Inspection
ON-VEHICLE INSPECTION CAUTION / NOTICE / HINT CAUTION: To prevent injury due to contact with an operating V-ribbed belt or cooling fan, keep your hands and clothing away from the V-ribbed belt and cooling fans when working in the engine compartment with the engine running or the engine switch on (I ...