REMOVAL
PROCEDURE
1. REMOVE TONNEAU COVER ASSEMBLY
Click here
2. REMOVE DECK BOARD ASSEMBLY
Click here
3. REMOVE REAR NO. 4 FLOOR BOARD
Click here
4. REMOVE DECK SIDE TRIM BOX LH
Click here
5. REMOVE NO. 1 DECK BOARD
Click here
6. DISCONNECT REAR NO. 2 SEAT ASSEMBLY
Click here
7. REMOVE REAR DECK FLOOR BOX
Click here
8. REMOVE FRONT DECK FLOOR BOX
Click here
9. REMOVE REAR FLOOR FINISH PLATE
Click here
10. REMOVE REAR NO. 3 SPEAKER ASSEMBLY
NOTICE:
Do not touch the speaker cone.
| (a) Disconnect the connector. |
|
(b) Remove the 4 bolts and rear No. 3 speaker assembly.
Components
InspectionLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Brake Pedal: Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during brake pedal support assembly removal/installation are shown below. Necessary Procedure After Parts Removed ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Spiral Cable: Inspection
INSPECTION PROCEDURE 1. INSPECT SPIRAL CABLE SUB-ASSEMBLY NOTICE:
Do not remove the steering sensor from the spiral cable sub-assembly when inspecting the spiral cable sub-assembly.
Remove the steering sensor from the spiral cable sub-assembly only when replacing the spiral cable sub-assembly.
...