ON-VEHICLE INSPECTION
CAUTION / NOTICE / HINT
CAUTION:
Be sure to correctly follow the removal and installation procedures for the front seat airbag assemblies.
PROCEDURE
1. INSPECT FRONT SEAT AIRBAG ASSEMBLY (for Vehicle not Involved in Collision)
(a) Perform a diagnostic system check.
Click here
(b) Visually check for defects with the front seat airbag assemblies installed to the vehicle.
HINT:
The defects are as follows:
OK:
No defects are found.
If any defects are found, replace the separate type front seatback pad, separate type front seatback cover or front seatback pad with cover with a new one.
2. INSPECT FRONT SEAT AIRBAG ASSEMBLY (for Vehicle Involved in Collision and Airbag not Deployed)
(a) Perform a diagnostic system check.
Click here
(b) Visually check for defects with the front seat airbag assemblies removed from the vehicle.
HINT:
The defects are as follows:
OK:
No defects are found.
If any defects are found, replace the front seat airbag assembly with a new one.
Components
RemovalLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Rear Center Seat Outer Belt Assembly(w/o Rear No. 2 Seat): Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during rear center seat outer belt assembly removal/installation are shown below. Necessary Procedure After Par ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Rear Airbag Sensor(w/o Rear No. 2 Seat): Components
COMPONENTS ILLUSTRATION *1 REAR AIRBAG SENSOR *2 REAR DOOR SCUFF PLATE *3 REAR SEAT SIDE GARNISH *4 UPPER QUARTER TRIM PAD Tightening torque for "Major areas involving basic vehicle performance such as moving/turning/stopping" : N*m (kgf*cm, ft.*lbf) - - ...