DTC CHECK / CLEAR
DTC CHECK
(a) Turn the engine switch off.
(b) Connect the Techstream to the DLC3.
(c) Turn the engine switch on (IG), and wait for at least 10 seconds.
(d) Turn the Techstream on.
(e) Enter the following menus: Body Electrical / Occupant Detection / Trouble Codes.
Body Electrical > Occupant Detection > Trouble Codes(f) Check for DTCs by following the prompts on the Techstream screen.
HINT:
Refer to the Techstream operator's manual for further details.
DTC CLEAR
(a) Turn the engine switch off.
(b) Connect the Techstream to the DLC3.
(c) Turn the engine switch on (IG), and wait for at least 10 seconds.
(d) Turn the Techstream on.
(e) Enter the following menus: Body Electrical / Occupant Detection / Trouble Codes.
Body Electrical > Occupant Detection > Clear DTCs(f) Clear the DTCs by following the prompts on the Techstream screen.
HINT:
Refer to the Techstream operator's manual for further details.
Diagnosis System
Fail-safe ChartLexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Rear Evaporator Temperature Sensor: Removal
REMOVAL PROCEDURE 1. REMOVE REAR COOLING UNIT ASSEMBLY Click here 2. REMOVE REAR NO. 2 COOLING UNIT DAMPER SERVO SUB-ASSEMBLY Click here 3. REMOVE REAR NO. 1 COOLING UNIT DAMPER SERVO SUB-ASSEMBLY Click here 4. REMOVE NO. 1 COOLING UNIT BRACKET Click here 5. REMOVE NO. 2 COOLING UNIT BRAC ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Blind Spot Monitor System: Power Source Circuit
DESCRIPTION This circuit provides power to operate the blind spot monitor sensor. WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE: Inspect the fuses for circuits related to this system before performing the following procedure. PROCEDURE 1. CHECK HARNESS AND CONNECTOR (BLIND SPOT MONITOR SENSOR ...