FAIL-SAFE CHART
FAIL-SAFE FUNCTION
(a) The following chart shows the status of the front passenger SRS items and passenger airbag ON/OFF indicator operation under each condition.
| Condition | Passenger Airbag ON/OFF Indicator | Front Passenger SRS Item | |||||
|---|---|---|---|---|---|---|---|
| ON Indicator | OFF Indicator | Instrument Panel Passenger Airbag Assembly | Front Seat Airbag Assembly RH | Front Seat Cushion Airbag Assembly RH | Curtain Shield Airbag Assembly RH | Front Seat Outer Belt Assembly RH | |
| Adult*1 is seated | ON | OFF | ○ | ○ | ○*3 | ○ | ○ |
| Child*2 is seated | ON or OFF*2 | OFF or ON*2 | ○ or X*2 | ○ | ○ or X*2*3 | ○ | ○ |
| Child restraint system is installed | OFF | ON | X | ○ | X | ○ | ○ |
| Vacant | OFF | ON | X | ○ | X | ○ | ○ |
| Failure | OFF | ON | X | ○ | X | ○ | ○ |
Dtc Check / Clear
Data List / Active TestLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Propeller Shaft Assembly: Removal
REMOVAL PROCEDURE 1. REMOVE NO. 2 ENGINE UNDER COVER Click here 2. REMOVE FRONT FLOOR COVER LH Click here 3. REMOVE FRONT CENTER FLOOR COVER for TMC Made: Click here for TMMC Made: Click here 4. REMOVE WIRING HARNESS CLAMP BRACKET (a) Disengage the 2 clamps. (b) Remove ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Luggage Speaker (w/o Rear No. 2 Seat): Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during rear No. 3 speaker assembly removal/installation are shown below. Necessary Procedures After Parts Remo ...