INSTALLATION
PROCEDURE
1. INSTALL ELECTRICAL KEY ANTENNA
(a) Engage the guide as shown in the illustration and install the electrical key antenna with the nut.
| Install in this Direction |
NOTICE:
Be careful when installing the electrical key antenna. If the electrical key antenna is dropped, replace it with a new one.
(b) Connect the connector.
2. INSTALL REAR BUMPER ENERGY ABSORBER (w/o Rear No. 2 Seat)
Click here
3. INSTALL REAR BUMPER ENERGY ABSORBER (w/ Rear No. 2 Seat)
Click here
4. INSTALL REAR BUMPER ASSEMBLY (w/o Rear No. 2 Seat)
Click here
5. INSTALL REAR BUMPER ASSEMBLY (w/ Rear No. 2 Seat)
Click here
RemovalLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Power Steering System: Torque Sensor1 (C1511-C1514,C1517)
DESCRIPTION The torque sensor converts the rotational torque received from the steering wheel into electric signals and sends them to the power steering ECU assembly. DTC No. Detection Item DTC Detection Condition Trouble Area Warning Indicate Return-to-normal Condition Note C1511 ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Navigation System: Vehicle Speed Signal Circuit between Navigation ECU and Combination Meter
DESCRIPTION The navigation ECU receives a vehicle speed signal from the combination meter assembly. HINT:
A voltage of 12 V or 5 V is output from each ECU and then input to the combination meter assembly. The signal is changed to a pulse signal at the transistor in the combination meter assembly. ...