INSTALLATION
PROCEDURE
1. INSTALL NAVIGATION ANTENNA BRACKET
2. INSTALL NAVIGATION ANTENNA ASSEMBLY
(a) Engage the 6 guides and 2 claws to install the navigation antenna assembly as shown in the illustration.
![]() | Install in this Direction |
3. INSTALL NAVIGATION ANTENNA ASSEMBLY WITH BRACKET
(a) Connect the connector.
(b) Engage the 2 claws.
(c) Install the navigation antenna assembly with bracket with the 2 screws.
4. INSTALL DEFROSTER NOZZLE ASSEMBLY
Click here
5. INSTALL INSTRUMENT PANEL SAFETY PAD
Click here
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Can Communication System: Combination Meter Mirror ECU Communication Stop Mode
DESCRIPTION Detection Item Symptom Trouble Area Combination Meter Mirror ECU Communication Stop Mode Either condition is met:
"Head Up Display" is not displayed on the CAN Bus Check screen of the Techstream.
Click here
Communication system DTCs (DTCs that start with U) that co ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Power Mirror Control System (w/o Memory): Terminals Of Ecu
TERMINALS OF ECU CHECK OUTER MIRROR CONTROL ECU ASSEMBLY (DRIVER DOOR) (a) Disconnect the N4 outer mirror control ECU assembly (driver door) connector. (b) Measure the voltage and resistance according to the value(s) in the table below. HINT: Measure the values on the wire harness side with the con ...