PROCEDURE
| 1. | CHECK AUDIO SETTINGS |
(a) In sound output setting mode, set volume, fader and balance to the initial values and check that the sound is normal.
OK:
Audio system returns to normal.
HINT:
Sound quality adjustment measures vary according to the type of amplifier.
| OK | | END |
| NG | | PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE |
Noise Occurs
Disc cannot be Inserted or is Ejected Right After InsertionLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Automatic High Beam Main Switch: Installation
INSTALLATION PROCEDURE 1. INSTALL AUTOMATIC HIGH BEAM MAIN SWITCH ASSEMBLY (INTEGRATION CONTROL AND PANEL ASSEMBLY) (a) Engage the 4 claws to install the automatic high beam main switch assembly (integration control and panel assembly) as shown in the illustration. Install in this Direction ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Rear Light Assembly: Inspection
INSPECTION PROCEDURE 1. INSPECT REAR LIGHT ASSEMBLY LH (a) Apply battery voltage to the rear light assembly LH and check that the lights come on. OK: Condition Specified Condition Battery positive (+) → Terminal 2 (B) Battery negative (-) → Terminal 1 (E) Taillight comes on Ba ...