PROCEDURE
| 1. | CHECK USAGE CONDITION |
(a) Check that the vehicle and cellular phone meet the following conditions:
NOTICE:
If changing cellular phone settings, updating software, etc. is necessary, make sure to obtain the permission of the customer before performing it.
Click here
(b) Connect the cellular phone to the in-vehicle device and check that it is connected correctly.
| Result | Proceed to |
|---|---|
| The cellular phone is connected correctly. | A |
| The cellular phone is not connected correctly. | B |
| A | | END |
|
| 2. | RESTART CELLULAR PHONE |
(a) Restart the cellular phone.
(b) Turn the engine switch off.
(c) Turn the engine switch on (ACC).
(d) Connect the cellular phone to the in-vehicle device and check that it is connected correctly.
| Result | Proceed to |
|---|---|
| The cellular phone is connected correctly. | A |
| The cellular phone is not connected correctly. | B |
| A | | END |
|
| 3. | CHECK OPERATION |
(a) Check if the in-vehicle device can be recognized by the cellular phone.
| Result | Proceed to |
|---|---|
| In-vehicle device can be recognized. | A |
| In-vehicle device cannot be recognized. | B |
| B | | GO TO STEP 5 |
|
| 4. | REGISTER AGAIN |
(a) Clear all "Bluetooth" devices registered to the cellular phone and the radio receiver assembly.
(b) Register the cellular phone again.
(c) Connect the cellular phone to the in-vehicle device and check that it is connected correctly.
| Result | Proceed to |
|---|---|
| The cellular phone is connected correctly. | A |
| The cellular phone is not connected correctly. | B |
| A | | END |
|
| 5. | CHECK USING ANOTHER VEHICLE |
(a) Check if the customer's cellular phone functions normally using another "Bluetooth" compatible vehicle.
HINT:
| Result | Proceed to |
|---|---|
| The cellular phone is connected correctly. | A |
| The cellular phone is not connected correctly. | B |
| A | | PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE |
|
| 6. | CHECK USING ANOTHER CELLULAR PHONE |
(a) Check if the system functions normally using another "Bluetooth" compatible cellular phone.
HINT:
| Result | Proceed to |
|---|---|
| The cellular phone is connected correctly. | A |
| The cellular phone is not connected correctly. | B |
| A | | END (ONLY A "Bluetooth" COMPATIBLE CELLULAR PHONE CAN BE USED) |
| B | | PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE |
Cellular Phone Registration Failure
Sound of Portable Player cannot be Heard from Speakers or Sound is LowLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Ptc Heater Assembly: Inspection
INSPECTION PROCEDURE 1. INSPECT QUICK HEATER ASSEMBLY (a) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Condition Specified Condition J71-1 (B) - J71-2 (E) Always Below 1 Ω J71-3 (B) - J70-1 (E) Always Below 1 ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Automatic Transaxle System: Transmission Fluid Temperature Sensor "A" Circuit Short to Battery or Open (P071015)
DESCRIPTION The ATF temperature sensor converts the automatic transaxle fluid (ATF) temperature into a resistance value for use by the ECM. The ECM applies voltage to the temperature sensor through terminal THO1 of the ECM. The sensor resistance changes with the ATF temperature. As the temperature r ...