Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual: Black Screen

PROCEDURE

1.

CHECK DISPLAY SETTING

(a) Check that the display is not in screen off mode.

OK:

The display setting is not in screen off mode.

NG

CHANGE SCREEN TO SCREEN ON MODE

OK

2.

CHECK IMAGE QUALITY SETTING

(a) Check that the screen color quality can be set.

OK:

Setting is possible.

OK

SET SCREEN COLOR QUALITY TO NORMAL

NG

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE

    Pointer not Displayed on Screen or Pointer does not Move
    CAUTION / NOTICE / HINT NOTICE: Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precau ...

    Steering Pad Switch Circuit
    DESCRIPTION This circuit sends an operation signal from the steering pad switch assembly to the radio receiver assembly. If there is an open in the circuit, the navigation system cannot be operated us ...

    Other materials:

    Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Instrument Panel Speaker: Removal
    REMOVAL CAUTION / NOTICE / HINT for Side: Use the same procedure for the RH side and LH side. The following procedure is for the LH side. PROCEDURE 1. REMOVE NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY (for Side) Click here 2. REMOVE FRONT NO. 2 SPEAKER ASSEMBLY (for Side) NOTICE: ...

    Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Blind Spot Monitor System: Blind Spot Monitor Slave Module Beam Axis Inspection Incomplete (C1ABC)
    DESCRIPTION This DTC is stored when a beam axis adjustment has not been performed for the blind spot monitor sensor RH. HINT: This DTC is always stored after replacing a blind spot monitor sensor. The purpose of this DTC is to ensure that a beam axis adjustment is performed. Completing the beam axis ...

    Lexus RX (RX 350L, RX450h) 2016-{YEAR} Owners Manual

    Lexus RX (RX 350L, RX450h) 2016-{YEAR} Repair Manual

    © 2025 Copyright www.lexusrx.net
    0.0196