INSTALLATION
PROCEDURE
1. INSTALL TELEPHONE MICROPHONE ASSEMBLY
(a) Engage the 2 claws to install the telephone microphone assembly to the No. 1 microphone case.
| *1 | Telephone Microphone Assembly |
| *2 | No. 1 Microphone Case |
| Install in this Direction (Telephone Microphone Assembly) |
| Install in this Direction (No. 1 Microphone Case) |
(b) Connect the connector.
2. INSTALL ROOF HEADLINING ASSEMBLY
w/o Rear No. 2 Seat:
Click here
w/ Rear No. 2 Seat:
Click here
RemovalLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Immobiliser System: Immobiliser System does not Operate Properly
DESCRIPTION The immobiliser system compares the ID code that is registered to the certification ECU (smart key ECU assembly) with the ID code of the transponder chip that is embedded in the electrical key transmitter sub-assembly. WIRING DIAGRAM Refer to B279986. Click here CAUTION / NOTICE / HINT ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Rear No. 2 Seat Assembly: Inspection
INSPECTION PROCEDURE 1. INSPECT NO. 2 SEAT CUSHION FRAME SUB-ASSEMBLY RH *a Component without harness connected (No. 2 Seat Cushion Frame Sub-assembly RH) (a) Apply battery voltage to the lifter motor connector, and check that the No.2 seat cushion frame sub-assembly RH operates smoothly as ...