OPERATION CHECK
ICS OFF INDICATOR LIGHT OPERATION CHECK
(a) Turn the engine switch on (IG).
(b) Turn the intelligent clearance sonar system off and confirm that the ICS OFF indicator in the combination meter illuminates.
HINT:
If the intelligent clearance sonar system is not set to off in the customize settings, the intelligent clearance sonar system will operate when the engine switch is turned on (IG).
DETECTION AREA
(a) Intelligent clearance sonar system detection distance
HINT:
The detection range shown in the illustration is for when detecting an object that is 2.0 m (6.562 ft.) wide, 1.0 m (3.281 ft.) tall and is perpendicular to the ground.
NOTICE:
Even if the intelligent clearance sonar system detects an object, the system may not operate depending on the vehicle conditions.
How To Proceed With Troubleshooting
System DescriptionLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Cruise Control Main Switch: Inspection
INSPECTION PROCEDURE 1. INSPECT CRUISE CONTROL MAIN SWITCH (a) Measure the resistance according to the value(s) in the table below. *a Component without harness connected (Cruise Control Switch) - - Standard Resistance: Tester Connection Condition Specified Condition 1 (ECC) ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Meter / Gauge System: Tachometer Malfunction
DESCRIPTION In this circuit, the combination meter assembly receives engine speed signals from the ECM via CAN communication. The combination meter assembly displays the engine speed calculated based on the data received from the ECM. WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE:
When replacing ...