DIAGNOSIS SYSTEM
DESCRIPTION
(a) When troubleshooting a vehicle with a diagnosis system, the only difference from the usual troubleshooting procedure is connecting the Techstream to the vehicle and reading various data output from the clearance warning ECU assembly.
The clearance warning ECU assembly stores DTCs when the ECU detects a malfunction in the ECU itself or in its circuits.
To check the DTCs, connect the Techstream to the DLC3 on the vehicle. The Techstream makes it possible to clear the DTCs, activate the various actuators, and check the freeze frame data and Data List.
CHECK DLC3
(a) Check the DLC3.
Click here
Terminals Of Ecu
Dtc Check / ClearLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Vehicle Stability Control System: Left Rear Wheel Speed Sensor Signal Stuck Low (C050C23)
DESCRIPTION Refer to DTC C050C1F. Click here DTC No. Detection Item DTC Detection Condition Trouble Area C050C23 Left Rear Wheel Speed Sensor Signal Stuck Low Any of the following is detected:
When the +BS terminal voltage is 17.4 V or less at a vehicle speed of 10 km/h (6 mph) ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Steering Gear: Installation
INSTALLATION PROCEDURE 1. INSTALL TIE ROD ASSEMBLY LH (a) Install the lock nut and tie rod assembly LH to the steering gear assembly until the matchmarks are aligned. HINT: After adjusting the toe-in, tighten the lock nut. *a Matchmark 2. INSTALL TIE ROD ASSEMBLY RH HINT: ...