DTC CHECK / CLEAR
CHECK DTC
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Chassis / Rear Camera / Trouble Codes.
Chassis > Rear Camera > Trouble Codes(e) Enter the following menus: Body Electrical / Navigation System / Trouble Codes.
Body Electrical > Navigation System > Trouble Codes(f) Check for DTCs.
Click here
NOTICE:
Refer to navigation system*1
Click here
Refer to audio and visual system (for 8 Inch Display)*2
Click here
Refer to audio and visual system (for 12.3 Inch Display)*3
Click here
System | Proceed to |
---|---|
Navigation System*1 | |
Audio and Visual System (for 8 Inch Display)*2 | |
Audio and Visual System (for 12.3 Inch Display)*3 | |
CLEAR DTC
(a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Chassis / Rear Camera / Trouble Codes.
Chassis > Rear Camera > Clear DTCs(e) Enter the following menus: Body Electrical / Navigation System / Trouble Codes.
Body Electrical > Navigation System > Clear DTCs(f) Clear the DTCs.
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Lane Control System: Freeze Frame Data
FREEZE FRAME DATA DESCRIPTION (a) Whenever a lane control system DTC is stored, the forward recognition camera stores the current vehicle state as Freeze Frame Data. CHECK FREEZE FRAME DATA (a) Connect the Techstream to the DLC3. (b) Turn the engine switch on (IG). (c) Turn the Techstream on. (d) En ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Sfi System: Internal Control Module Throttle Position Performance Internal Electronic Failure (P060E49,P061E49)
MONITOR DESCRIPTION The ECM monitors the signals received from the No. 1 throttle position sensor and stop light switch assembly. As the ECM monitors the STP signal of the stop light switch assembly and the VTA1 signal of the No. 1 throttle position sensor, if these signals do not correlate, a DTC w ...