REASSEMBLY
PROCEDURE
1. INSTALL BRAKE PEDAL PAD
(a) Install the brake pedal pad to the brake pedal sub-assembly.
2. INSTALL BRAKE PEDAL BUSHING
(a) Apply lithium soap base glycol grease to 2 new brake pedal bushings.
| Lithium Soap Base Glycol Grease |
(b) Install the 2 brake pedal bushings to the brake pedal sub-assembly.
3. INSTALL BRAKE PEDAL SHAFT COLLAR
(a) Install the brake pedal shaft collar to the brake pedal sub-assembly.
4. INSTALL BRAKE PEDAL SUB-ASSEMBLY
| (a) Install the brake pedal sub-assembly to the brake pedal support sub-assembly with the bolt and nut. Torque: 36.8 N·m {375 kgf·cm, 27 ft·lbf} NOTICE: Insert the bolt from left to right of the vehicle. |
|
(b) Engage the 2 clamps.
Adjustment
InstallationLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Integration Relay: On-vehicle Inspection
ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT SEMICONDUCTOR POWER INTEGRATION ECU (SIGNAL READING CHECK) NOTICE: Both present and history signal readings will be cleared if the semiconductor power integration ECU is removed. Make sure not to remove it before inspection. HINT: The signal readings of the ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Lin Communication System: Terminals Of Ecu
TERMINALS OF ECU CHECK INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY AND MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) (a) Disconnect the MB main body ECU (multiplex network body ECU) connector. Click here (b) Measure the voltage and resistance according to the value(s) in the table below. HINT: Measure ...