PROBLEM SYMPTOMS TABLE
HINT:
| Symptom | Suspected Area | Link |
|---|---|---|
| Electric parking brake does not operate | Proceed to "Electric Parking Brake does not Operate" | |
| Parking brake indicator light does not illuminate (red) or turn off when parking brake is manually engaged and disengaged | Proceed to "Electric Parking Brake does not Operate" | |
| Electric parking brake AUTO function (shift-linked function) does not operate (shift-linked parking brake does not lock or release) | Proceed to "Electric Parking Brake AUTO Function Circuit" | |
| Message not displayed on multi-information display when AUTO function set to ON/OFF | Proceed to "Message Not Displayed on Multi-information Display When AUTO Function Set to ON/OFF" | |
| Brake warning light (Yellow) remains on | Proceed to "Brake Warning Light (Yellow) Remains On" | |
| Electric parking brake switch indicator light on electric parking brake switch (electric parking brake switch assembly) does not illuminate or turn off when lock and release operations are performed | Electric parking brake switch indicator light drive circuit | |
| Wire harness or connector (electric parking brake switch (electric parking brake switch assembly) - skid control ECU (brake actuator assembly)) | - | |
| Electric parking brake switch (electric parking brake switch assembly) | | |
| Skid control ECU (brake actuator assembly) | |
How To Proceed With Troubleshooting
Test Mode ProcedureLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Sfi System: Internal Control Module Random Access Memory (RAM) Error Data Memory Failure (P060444)
MONITOR DESCRIPTION The ECM continuously monitors its internal memory status. This self-check ensures that the ECM is functioning properly. The ECM memory status is diagnosed by internal mirroring of the main CPU and sub CPU to detect Random Access Memory (RAM) errors. If outputs from these CPUs are ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Meter / Gauge System: Lost Communication with Clock Device (Local-CAN) (B1326)
DESCRIPTION After the combination meter assembly has started, the combination meter assembly attempts to detect the clock assembly by performing communication via local bus. This DTC is stored when the clock assembly has been detected but communication between the combination meter assembly and cloc ...