INSTALLATION
PROCEDURE
1. INSTALL COMBINATION SWITCH ASSEMBLY
(a) Install the combination switch assembly to the console box ornament with the 3 screws.
2. INSTALL CONSOLE BOX ORNAMENT
(a) Install the console box ornament to the shifting hole frame sub-assembly with the 4 screws.
(b) Install the console box bracket with the 2 screws.
3. INSTALL CONSOLE PANEL SUB-ASSEMBLY
Click here
4. INSTALL INSTRUMENT CLUSTER FINISH PANEL ORNAMENT
Click here
5. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
Click here
6. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL
Click here
7. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL
Click here
8. INSTALL REAR CONSOLE UPPER PANEL
Click here
Inspection
RemovalLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Automatic Transaxle System: Brake Switch "B" Circuit Short to Battery (P070312)
DESCRIPTION The purpose of the stop light switch signal circuit is to prevent the engine from stalling when the brakes are suddenly applied while driving in the lock-up condition. When the brake pedal is depressed, the stop light switch assembly sends a signal to the ECM. The ECM then cancels the op ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Rear No. 1 Seat Assembly (for 60/40 Split Seat Type Lh Side): Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during rear No. 1 seat assembly removal/installation are shown below. Necessary Procedure After Parts Removed/I ...