The air conditioning filter must be changed regularly to maintain air conditioning efficiency.
Removal method
1. Turn the power switch off.
2. Open the glove box. Slide off the damper.
3. Push in the glove box on the vehicle's outer side to disconnect the claws. Then pull out the glove box and disconnect the lower claws.
4. Remove the cover.
5. Remove the filter cover.
6. Remove the filter case.
There may be foreign objects on top of the air conditioning filter.
7. Remove the air conditioning filter from the filter case and replace it with a new one.
The "↑UP" marks shown on the filter and the filter case should be pointing up.
■ Checking interval Inspect and replace the air conditioning filter according to the maintenance schedule. In dusty areas or areas with heavy traffic flow, early replacement may be required. (For scheduled maintenance information, please refer to the "Owner's Manual Supplement" or "Scheduled Maintenance".)
■ If air flow from the vents decreases dramatically The filter may be clogged. Check the filter and replace if necessary.
■ Air conditioning filter with deodorizing function When fragrances are placed in your vehicle, the deodorizing effect may become significantly weakened in a short period.
When an air conditioning odor comes out continuously, replace the air conditioning filter.
NOTICE
■When using the air conditioning system Make sure that a filter is always installed.
Using the air conditioning system without a filter may cause damage to the system.
■ To prevent damage to the filter cover When moving the filter cover in the direction of arrow to release the fitting, pay attention not to apply excessive force to the claws. Otherwise, the claws may be damaged.
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Seat Position Sensor: Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed, installed, or replaced during the seat position airbag sensor removal/installation are shown below. Necessary Procedure After Parts Remo ...
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Hood Lock Control Cable Assembly: Removal
REMOVAL PROCEDURE 1. REMOVE FRONT WIPER MOTOR AND LINK ASSEMBLY Click here 2. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY Click here 3. REMOVE HOOD LOCK CONTROL CABLE COVER (a) Remove the screw. (b) Disengage the clamp and remove the hood lock control cable cover. 4. REMOVE HOOD LO ...