REASSEMBLY
PROCEDURE
1. INSTALL OIL PUMP ROTOR SET
| (a) Coat the drive rotor and driven rotor with engine oil and place them into the timing chain cover assembly with the rotor marks facing up. Check that the rotors rotate smoothly. |
|
2. INSTALL OIL PUMP COVER
| (a) Install the oil pump cover to the timing chain cover assembly with the 8 bolts. Torque: 9.1 N·m {93 kgf·cm, 81 in·lbf} Bolt Length:
|
|
3. INSTALL OIL PUMP RELIEF VALVE
(a) Coat the oil pump relief valve with engine oil.
(b) Insert the oil pump relief valve and oil pump relief valve spring into the oil pump cover hole.
| (c) Using a 27 mm socket wrench, install the oil pump relief valve plug to the oil pump cover. Torque: 49 N·m {500 kgf·cm, 36 ft·lbf} |
|
Inspection
InstallationLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > 2gr-fks (emission Control): Fuel Tank Cap
InspectionINSPECTION PROCEDURE 1. INSPECT FUEL TANK CAP ASSEMBLY (a) Visually check that the fuel tank cap assembly and gasket are not deformed or damaged. If the result is not as specified, replace the fuel tank cap assembly. *a Gasket (b) Confirm that ID mark V is pri ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Can Communication System: Yaw Rate Sensor Communication Stop Mode
DESCRIPTION Detection Item Symptom Trouble Area Yaw Rate Sensor Communication Stop Mode Either condition is met:
"Yaw Rate Sensor" is not displayed on the CAN Bus Check screen of the Techstream.
Click here
Communication system DTCs (DTCs that start with U) that correspond to " ...