DIAGNOSIS SYSTEM
FUNCTION OF INDICATOR AND WARNING MESSAGE
(a) If the lane control system is not functioning properly, the driver is warned through the LTA indicator and a warning message is displayed on the multi-information display.
| LTA Indicator | Warning Message | Details | DTC/Vehicle Control History (RoB) |
|---|---|---|---|
| Illuminated (yellow) | LTA Malfunction Visit Your Dealer | Lane control system is malfunctioning | Stored |
| Illuminated (yellow) | LTA Unavailable | Sensor other than forward recognition camera sensor is temporarily disabled | Stored |
| LTA Indicator | Condition |
|---|---|
| *: If the steering assist function operates while the lane departure alert function is operating, the LTA indicator will blink (yellow). | |
| Illuminated (yellow) | The lane control system is malfunctioning or temporarily disabled |
| Blinking (yellow) | Lane departure alert function is operating |
| Illuminated (green) | Steering assist function or lane centering function is operating* |
| Illuminated (white) | Monitoring for lane departure |
| Not illuminated | Lane control system is not operating |
| *a | LTA Indicator |
Terminals Of Ecu
Dtc Check / ClearLexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Telematics System: Utility
UTILITY CANCEL COMMUNICATION FUNCTION PAUSING HINT: This function is used to cancel communication function pausing mode. (a) Connect the Techstream to the DLC3. (b) Turn the engine switch on (IG). (c) Turn the Techstream on. (d) Enter the following menus: Body Electrical / Telematics / Utility / Can ...
Lexus RX (RX 350L, RX450h) 2016-2026 Repair Manual > Steering Gear: Inspection
INSPECTION PROCEDURE 1. INSPECT TIE ROD ASSEMBLY LH (a) Secure the tie rod assembly LH in a vise between aluminum plates. NOTICE: Do not overtighten the vise. (b) Install the nut to the stud bolt. (c) Flip the ball joint back and forth 5 times. (d) Using a torque wrench and the nut, t ...