DISASSEMBLY
CAUTION / NOTICE / HINT
NOTICE:
PROCEDURE
1. REMOVE STEERING LOCK ACTUATOR OR UPPER BRACKET ASSEMBLY
(a) Secure the steering column assembly in a vise between aluminum plates and cloths.
NOTICE:
Do not overtighten the vise.
(b) Using a drill, drill a hole in the steering lock set bolt and insert a screw extractor.
(c) Using the screw extractor, remove the 2 steering lock set bolts and steering lock actuator or upper bracket assembly. |
|
2. REMOVE MULTIPLEX TILT AND TELESCOPIC ECU
(a) Using a screwdriver with its tip wrapped with protective tape, disengage the claw and remove the multiplex tilt and telescopic ECU. |
|
3. REMOVE POWER STEERING ECU ASSEMBLY
Click here
Lexus RX (RX 350L, RX450h) 2016-2025 Repair Manual > Sliding Roof Housing (for Slidng Roof): Reassembly
REASSEMBLY PROCEDURE 1. INSTALL SLIDING ROOF DRIVE CABLE SUB-ASSEMBLY (a) Hold down the roof wind deflector panel sub-assembly. Hold Position (b) Using a screwdriver, slide the sliding roof drive cable LH as shown in the illustration to install it. *a Protective Tape Push Posi ...
Lexus RX (RX 350L, RX450h) 2016-2025 Owners Manual > Driving procedures: Brake Hold
The brake hold system keeps the brake applied when the shift lever is
in D, S or
N with the system on and the brake pedal has been depressed to stop the vehicle.
The system releases the brake when the accelerator pedal is depressed
with the shift lever in D or S to allow smooth start off.
Tu ...